DT6228
From the capaNCDT DT62xx controllers series
capaNCDT DT62xx controllers: measurement controllers by Micro-Epsilon for capacitive.
- Number of measurement channels
- 4
Technical specification
Every engineering figure, laid out to scan quickly
| Linearity (% FSO) | 0.05 % |
|---|---|
| Interfaces | Ethernet |
| Output update rate | 3.906 kHz |
| Number of measurement channels | 4 |
| Storage temperature | -10–75 °C |
| Operating temperature | 10–60 °C |
| Protection class (DIN EN 60529) | IP40 |
| Frequency response cutoff Maximum rate with a compatible controller | 1 kHz (−3 dB) |
| Channels | Up to 4 inputs; one module per sensor head |
| Analog output | 0–10 V / 4–20 mA; select output path |
| Static resolution (% FSO) | 0.0005 % FSO (RMS; 2 Hz; end-of-range reference) |
| Dynamic resolution (% FSO) | 0.01 % FSO (RMS; 1 kHz) |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Dimension (drawing reference) | 75 mm |
|---|---|
| Dimension (drawing reference) | 100 mm |
| Dimension (drawing reference) | 125 mm |
| Dimension (drawing reference) | 150 mm |
| Dimension (drawing reference) | 90 mm |
Compatible system components
Accessories
-
DL6228
- Measuring rate
- Not specified
- Communication
- Not specified
- Inputs
- 1
- Signal type
- Not specified
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
DT6228 uses DL6228 demodulators. The manufacturer recommends this combination for CSE-x/HT high-temperature sensors and lists general compatibility with all capaNCDT sensors. The HT recommendation is not a restriction to HT sensors only.
DT6228 lists Ethernet. Select the basic-module model for the required communication, and the number of DL6228 modules for the required measuring channels, up to 4 channels. A supported channel is not necessarily an installed channel.
The table lists a maximum digital measuring rate of 3.906 kHz and an analogue bandwidth of 1 kHz, switchable to 20 Hz. These are separate parameters; filter and bandwidth selection also affect noise and resolution conditions.
The listed linearity below ±0.05% FSO applies to the controller only; add the sensor contribution. IP40 is the controller protection class, not a temperature or ingress rating for the sensor head, cable or complete assembly.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product