IFC2422

From the confocalDT IFC24xx controllers series

confocalDT IFC24xx controllers: measurement controllers by Micro-Epsilon.

Number of measurement channels: 2

Request a quote for this product Schedule a demonstration Talk to an expert

Visit the Micro-Epsilon site

Manufacturer visual; model-specific labels and scope are defined in gallery bindings

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for IFC2422
Linearity (% FSO)	Typical linearity < ±0.02% FSO; depends on sensor
Measuring rate	10 kHz
Layers in multi-peak measurement	1 layer
Power consumption	10 W
Number of measurement channels	2
Storage temperature	-20–70 °C
Operating temperature	5–50 °C
Protection class (DIN EN 60529)	IP40
Weight	2.25 kg
Controller operation and indicators	Multifunction button for adjustable functions and factory reset after 10 s; five LEDs for intensity, range, status and supply voltage.
Permissible ambient light	30,000 lx
Adjustable measuring rate range	100–10000 Hz
Controller light source	Internal white LED
Characteristic curves per channel	up to 20 characteristic curves for different sensors per channel, selected via menu table
Controller synchronisation	yes
Controller electrical connection	3-pin supply terminal strip; 15-pin HD-sub encoder connection (max. 3 m, 30 m with external encoder supply); 9-pin Sub-D RS422 (max. 30 m); 3-pin output terminal strip (max. 30 m); 11-pin I/O terminal strip (max. 30 m); RJ45 Ethernet out/EtherCAT in-out (max. 100 m)
Controller housing material	Aluminum
Controller mounting	free-standing, DIN rail mounting
Controller indicators	Web interface; multifunction button; indicator LEDs (source table differs by family)
Analog output resolution	16 bit — analog output, teachable span
RS422 output resolution	18 bit — RS422 output
Ethernet output resolution	1 nm — Ethernet/EtherCAT output
Channels	2
Analog output	Voltage 0–10 V; current 4–20 mA
Signal type	Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.