ES-U1-T

From the eddyNCDT 3020 series

eddyNCDT 3020: sensors and measurement devices by Micro-Epsilon for inductive (eddy current).

Number of measurement channels: 1

Request a quote for this product Build a matching system for this model Schedule a demonstration Talk to an expert

Download the datasheet This series on the Micro-Epsilon site

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for ES-U1-T
Measuring range	1 mm
Start of measuring range	0.1 mm
End of measuring range	1.1 mm
Working distance	0.1–1.1 mm
Linearity	2 µm
Resolution	0.04 µm
Minimum target diameter	18 mm
Number of measurement channels	1
Storage temperature	-20–180 °C
Operating temperature	-20–180 °C
Cable length	3 m
Sensor mounting	"Clamp mounting; no thread"
Sensor shielding	"unshielded"
Technical specification details	0-1 mm model-level measuring interval
Accuracy (% FSO)	0.2 %
Sampling rate reference	DT3020: 80 kSamples/s analog output; 10 kSamples/s digital output; adjustable bandwidth up to 5 kHz
Linearity reference	Official ES-U1-T sensor linearity; the DT3020 controller adds <±0.2% FSO after 3-point linearization.
Contact	Non-contact

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

Interfaces	EtherCAT
Interfaces	Ethernet
Interfaces	USB
Interfaces	PROFINET
Outputs and interfaces	4-20mA
Outputs and interfaces	RS422 / RS485
Outputs and interfaces	Digital I/O
Protection class (DIN EN 60529)	IP67
Protection class (DIN EN 60529)	IP68

Request a quote for this product

Compatible system components

Controllers

DT3020 Required

Measuring rate

Not specified

Communication

RS-485

Inputs

Not specified

Signal type

Not specified

Exact source configuration configuration-a02c5f856846283659e707dd; no substitution of interface variant or simultaneous performance inferred.
Product page Datasheet

Build a matching system for this model

Compatible accessories

Cables

PC5/8-M12/105 Required with the chosen components
Product page Datasheet
PCx/8-M12 configurable component family Required with the chosen components Only for source configuration configuration-a02c5f856846283659e707dd: ES-U1-T; selected configuration must be matched before display.; A 10 m drag-chain variant is listed separately; do not assume all standard lengths are drag-chain qualified.
Product page