ES-S1

From the eddyNCDT ES sensor heads series

eddyNCDT ES sensor heads: sensors and measurement devices by Micro-Epsilon for inductive (eddy current).

Number of measurement channels: 1

Request a quote for this product Build a matching system for this model Schedule a demonstration Talk to an expert

Visit the Micro-Epsilon site

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for ES-S1
Measuring range	1 mm
Start of measuring range	0.1 mm
End of measuring range	1.1 mm
Working distance	0.1–1.1 mm
Linearity	2 µm
Resolution	0.04 µm
Minimum target diameter	12 mm
Number of measurement channels	1
Storage temperature	-20–200 °C
Operating temperature	-20–200 °C
Weight	0.0024 kg
Cable length	3 m
Sensor mounting	"Screw connection (M8)"
Sensor shielding	"shielded"
Technical specification details	0-1 mm model-level measuring interval
Accuracy	1 µm
Accuracy (% FSO)	0.2 %
Linearity reference	Official ES-S1 sensor linearity; the DT3020 controller adds <±0.2% FSO after 3-point linearization.
Contact	Non-contact

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

Interfaces	USB
Interfaces	EtherCAT
Interfaces	Ethernet
Interfaces	PROFINET
Outputs and interfaces	Digital I/O
Outputs and interfaces	4-20mA
Outputs and interfaces	Analog 0-10V
Outputs and interfaces	RS422 / RS485
Protection class (DIN EN 60529)	IP67
Protection class (DIN EN 60529)	IP68
Sampling rate reference	DT3060: 200 kSamples/s analog output; 50 kSamples/s digital output; 20 kHz bandwidth
Sampling rate reference	DT3061: 200 kSamples/s analog output; 50 kSamples/s digital output; 20 kHz bandwidth
Sampling rate reference	DT3020: 80 kSamples/s analog output; 10 kSamples/s digital output; adjustable bandwidth up to 5 kHz

Request a quote for this product

Compatible system components

Controllers

DT3020 Required

Measuring rate

Not specified

Communication

RS-485

Inputs

Not specified

Signal type

Not specified

Exact source configuration configuration-5d2c791ed6c156122fa88c4d; no substitution of interface variant or simultaneous performance inferred.
Product page Datasheet

Build a matching system for this model

Compatible accessories

Cables

PC5/8-M12/105 Required with the chosen components
Product page Datasheet
SCD2/4/RJ45 Required with the chosen components
Product page Datasheet
PCx/8-M12 configurable component family Required with the chosen components Only for source configuration configuration-fdfa726fb131130b16f24afa: ES-S1; selected configuration must be matched before display.; A 10 m drag-chain variant is listed separately; do not assume all standard lengths are drag-chain qualified.
Product page