ILD1910-750
From the optoNCDT 1910 series
optoNCDT 1910: sensors and measurement devices by Micro-Epsilon for laser triangulation.
Download the datasheet (opens in a new tab) This series on the Micro-Epsilon site (opens in a new tab)
Technical specification
Every engineering figure, laid out to scan quickly
| Measuring range | 750 mm |
|---|---|
| Start of measuring range | 200 mm |
| End of measuring range | 950 mm |
| Working distance | 200–950 mm |
| Linearity (% FSO) | 0.08 % |
| Repeatability | 30 µm |
| Measuring rate | 9.5 kHz |
| Operating temperature | 0–50 °C |
| Protection class (DIN EN 60529) | IP67 |
| Technical specification details | Measuring range 750 mm; start/midpoint/end 200/575/950 mm. Ambient-light tolerance 10,000 lx. Sensor mass about 600 g. |
| Accuracy | 600 µm |
| Accuracy (% FSO) | 0.08 % |
| Linearity reference | Official maximum linearity deviation ±600 µm, equivalent to ±0.08% FSO. |
| Light spot width X | 1.1 mm |
| Sampling rate reference | Continuously adjustable 0.25-9.5 kHz; fixed stages 9.5, 8, 4, 2, 1 kHz, 500 Hz and 250 Hz. |
| Light spot width Y | 1.1 mm |
| Repeatability reference | Official repeatability 30 µm under datasheet reference conditions. |
| Contact | Non-contact |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Interfaces | PROFINET |
|---|---|
| Interfaces | RS422 |
| Interfaces | EtherNet/IP |
| Interfaces | EtherCAT |
| Interfaces | Ethernet |
| Outputs and interfaces | 4-20mA |
| Outputs and interfaces | RS422 / RS485 |
| Outputs and interfaces | Digital I/O |
| Outputs and interfaces | Analog 0-10V |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product