wireSENSOR P200
wireSENSOR P200 draw-wire sensors; range and output are selected per model.
Download the datasheet (opens in a new tab) This series on the Micro-Epsilon site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
Range across models
The span covered by the models of the series together — not the range of each model.
| Measuring range | 30000–50000 mm |
|---|---|
| Linearity | 3000–5000 µm |
| Output resolution (length) | 61–167 µm |
Models in the series
One column per model: what differs between the models of the series.
| Parameter | WDS-30000-P200-BH-CAT | WDS-30000-P200-BH-CO | WDS-30000-P200-BH-ENIP | WDS-30000-P200-BH-PB | WDS-30000-P200-BH-PN | WDS-30000-P200-CR-HTL | WDS-30000-P200-CR-TTL | WDS-30000-P200-SR-SSI | WDS-40000-P200-BH-CAT | WDS-40000-P200-BH-CO | WDS-40000-P200-BH-ENIP | WDS-40000-P200-BH-PB | WDS-40000-P200-BH-PN | WDS-40000-P200-CR-HTL | WDS-40000-P200-CR-TTL | WDS-40000-P200-SR-SSI | WDS-50000-P200-BH-CAT | WDS-50000-P200-BH-CO | WDS-50000-P200-BH-ENIP | WDS-50000-P200-BH-PB | WDS-50000-P200-BH-PN | WDS-50000-P200-CR-HTL | WDS-50000-P200-CR-TTL | WDS-50000-P200-SR-SSI |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring range | 30000 mm | 30000 mm | 30000 mm | 30000 mm | 30000 mm | 30000 mm | 30000 mm | 30000 mm | 40000 mm | 40000 mm | 40000 mm | 40000 mm | 40000 mm | 40000 mm | 40000 mm | 40000 mm | 50000 mm | 50000 mm | 50000 mm | 50000 mm | 50000 mm | 50000 mm | 50000 mm | 50000 mm |
| Selected electrical output | EtherCAT | CANopen | EtherNet/IP | Profibus DP | PROFINET | HTL | TTL | SSI Gray code | EtherCAT | CANopen | EtherNet/IP | Profibus DP | PROFINET | HTL | TTL | SSI Gray code | EtherCAT | CANopen | EtherNet/IP | Profibus DP | PROFINET | HTL | TTL | SSI Gray code |
| Selected configuration options | range=30000 mm; suffix=BH-CAT; output=EtherCAT | range=30000 mm; suffix=BH-CO; output=CANopen | range=30000 mm; suffix=BH-ENIP; output=EtherNet/IP | range=30000 mm; suffix=BH-PB; output=Profibus DP | range=30000 mm; suffix=BH-PN; output=PROFINET | range=30000 mm; suffix=CR-HTL; output=HTL | range=30000 mm; suffix=CR-TTL; output=TTL | range=30000 mm; suffix=SR-SSI; output=SSI Gray code | range=40000 mm; suffix=BH-CAT; output=EtherCAT | range=40000 mm; suffix=BH-CO; output=CANopen | range=40000 mm; suffix=BH-ENIP; output=EtherNet/IP | range=40000 mm; suffix=BH-PB; output=Profibus DP | range=40000 mm; suffix=BH-PN; output=PROFINET | range=40000 mm; suffix=CR-HTL; output=HTL | range=40000 mm; suffix=CR-TTL; output=TTL | range=40000 mm; suffix=SR-SSI; output=SSI Gray code | range=50000 mm; suffix=BH-CAT; output=EtherCAT | range=50000 mm; suffix=BH-CO; output=CANopen | range=50000 mm; suffix=BH-ENIP; output=EtherNet/IP | range=50000 mm; suffix=BH-PB; output=Profibus DP | range=50000 mm; suffix=BH-PN; output=PROFINET | range=50000 mm; suffix=CR-HTL; output=HTL | range=50000 mm; suffix=CR-TTL; output=TTL | range=50000 mm; suffix=SR-SSI; output=SSI Gray code |
| Selected connection | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Integrated cable, radial, 1 m | Integrated cable, radial, 1 m | 12-pin flange connector, radial | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Integrated cable, radial, 1 m | Integrated cable, radial, 1 m | 12-pin flange connector, radial | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Bus cover; connector depends on selected protocol | Integrated cable, radial, 1 m | Integrated cable, radial, 1 m | 12-pin flange connector, radial |
| Protection class (DIN EN 60529) | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65 | IP65 | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65 | IP65 | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65; For plug versions only when connected | IP65 | IP65 | IP65; For plug versions only when connected |
| Interfaces | EtherCAT | CANopen | EtherNet/IP | ProfibusDP | PROFINET | Not specified | Not specified | Not specified | EtherCAT | CANopen | EtherNet/IP | ProfibusDP | PROFINET | Not specified | Not specified | Not specified | EtherCAT | CANopen | EtherNet/IP | ProfibusDP | PROFINET | Not specified | Not specified | Not specified |
| Linearity (% FSO) | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % | 0.01 % |
| Linearity | 3000 µm | 3000 µm | 3000 µm | 3000 µm | 3000 µm | 3000 µm | 3000 µm | 3000 µm | 4000 µm | 4000 µm | 4000 µm | 4000 µm | 4000 µm | 4000 µm | 4000 µm | 4000 µm | 5000 µm | 5000 µm | 5000 µm | 5000 µm | 5000 µm | 5000 µm | 5000 µm | 5000 µm |
| Output resolution (length) | 61 µm | 61 µm | 61 µm | 61 µm | 61 µm | 167 µm | 167 µm | 61 µm | 61 µm | 61 µm | 61 µm | 61 µm | 61 µm | 167 µm | 167 µm | 61 µm | 61 µm | 61 µm | 61 µm | 61 µm | 61 µm | 167 µm | 167 µm | 61 µm |
| Mechanical details from model-specific source cells | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 12 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 10 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 12 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 10 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 12 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 10 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 12 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 10 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 12 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 10 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 12 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 10 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 12 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 10 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 12 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 10 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 11 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 11 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 11 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 11 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 11 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 11 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 11 kg | Wire extension force (max.): approx. 22 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 11 kg | Wire extension force (max.): approx. 24 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 12 kg | Wire extension force (max.): approx. 24 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 12 kg | Wire extension force (max.): approx. 24 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 12 kg | Wire extension force (max.): approx. 24 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 12 kg | Wire extension force (max.): approx. 24 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 12 kg | Wire extension force (max.): approx. 24 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 12 kg | Wire extension force (max.): approx. 24 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 12 kg | Wire extension force (max.): approx. 24 N; Wire retraction force (min.): approx. 11 N; Wire acceleration (max.): approx. 2 g; Material / Housing: Aluminum; Material / Measuring wire: Polyamide-coated stainless steel (ø 0.8 mm); Wire mounting: Eyelet (ø 20.2 mm); Installation: Mounting grooves on the sensor housing; Temperature range / Storage: -20 … +80 °C; Temperature range / Operation: -20 … +80 °C; Shock (DIN EN 60068-2-27): 50 g / 10 ms in 3 axes, 1000 shocks each; Vibration (DIN EN 60068-2-6): 20 g / 20 … 2 kHz in 3 axes, 10 cycles each; Weight: approx. 12 kg |
| Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact | Contact |
| Status | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
| Datasheet | PDF — WDS-30000-P200-BH-CAT (opens in a new tab) | PDF — WDS-30000-P200-BH-CO (opens in a new tab) | PDF — WDS-30000-P200-BH-ENIP (opens in a new tab) | PDF — WDS-30000-P200-BH-PB (opens in a new tab) | PDF — WDS-30000-P200-BH-PN (opens in a new tab) | PDF — WDS-30000-P200-CR-HTL (opens in a new tab) | PDF — WDS-30000-P200-CR-TTL (opens in a new tab) | PDF — WDS-30000-P200-SR-SSI (opens in a new tab) | PDF — WDS-40000-P200-BH-CAT (opens in a new tab) | PDF — WDS-40000-P200-BH-CO (opens in a new tab) | PDF — WDS-40000-P200-BH-ENIP (opens in a new tab) | PDF — WDS-40000-P200-BH-PB (opens in a new tab) | PDF — WDS-40000-P200-BH-PN (opens in a new tab) | PDF — WDS-40000-P200-CR-HTL (opens in a new tab) | PDF — WDS-40000-P200-CR-TTL (opens in a new tab) | PDF — WDS-40000-P200-SR-SSI (opens in a new tab) | PDF — WDS-50000-P200-BH-CAT (opens in a new tab) | PDF — WDS-50000-P200-BH-CO (opens in a new tab) | PDF — WDS-50000-P200-BH-ENIP (opens in a new tab) | PDF — WDS-50000-P200-BH-PB (opens in a new tab) | PDF — WDS-50000-P200-BH-PN (opens in a new tab) | PDF — WDS-50000-P200-CR-HTL (opens in a new tab) | PDF — WDS-50000-P200-CR-TTL (opens in a new tab) | PDF — WDS-50000-P200-SR-SSI (opens in a new tab) |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
P200 is listed at 30000, 40000 and 50000 mm. Versions include HTL, TTL, SSI, CANopen, Profibus DP, PROFINET, EtherNet/IP and EtherCAT. The output is selected by model, not simultaneously built into every sensor.
No. The table lists 0.167 mm for HTL/TTL and 0.061 mm for SSI and the listed absolute bus versions. Resolution is separate from linearity, which is specified as FSO percentage and range-dependent displacement error.
The specified limit is ±0.01% FSO. For 30, 40 and 50 m ranges this equals ±3, ±4 and ±5 mm respectively. Encoder resolution is a separate specification.
Approximately 2g. Its long range does not establish compatibility with the higher accelerations of smaller, faster draw-wire families.
The aluminium housing has mounting grooves and a 20.2 mm wire eyelet. Maximum extension force is approximately 22 N at 30–40 m and 24 N at 50 m.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product