KMRplus Force
KMRplus: sensors and measurement devices by HBK for force.
This series on the HBK site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
| Ordering options and constraints | K-KMR+ — capacity: 4.5 klbf, 9 klbf, 13.5 klbf, 22.5 klbf, 45 klbf, 67.4 klbf, 89.9 klbf, 112 klbf, 135 klbf, 225 klbf, 450 klbf; height_without_accessories: 0.335 in, 0.394 in, 0.413 in, 0.492 in, 0.571 in, 0.65 in, 0.965 in, 1.75 in; diameter_without_cable_or_plug: 1.527556 in, 3.429127 in, 1.88976 in, 0.783463 in, 4.755896 in, 2.216531 in, 2.385822 in, 0.929132 in, 2.622042 in, 2.838577 in, 1.059053 in; constraints: [] |
|---|
Range across models
The span covered by the models of the series together — not the range of each model.
| Force range | 0–100000 N |
|---|---|
| Nominal force capacity | 20000–2000000 N |
| ADC sampling rate | 450–40000 samples/s |
Models in the series
One column per model: what differs between the models of the series.
| Parameter | K-KMR+ · 1 MN | K-KMR+ · 100 kN | K-KMR+ · 2 MN | K-KMR+ · 20 kN | K-KMR+ · 200 kN | K-KMR+ · 300 kN | K-KMR+ · 40 kN | K-KMR+ · 400 kN | K-KMR+ · 500 kN | K-KMR+ · 60 kN | K-KMR+ · 600 kN | KMRplus-1000kN | KMRplus-100kN | KMRplus-2000kN | KMRplus-200kN | KMRplus-20kN | KMRplus-300kN | KMRplus-400kN | KMRplus-40kN | KMRplus-500kN | KMRplus-600kN | KMRplus-60kN |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Force range | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 0–1000000 N | 0–100000 N | 0–2000000 N | 0–200000 N | 0–20000 N | 0–300000 N | 0–400000 N | 0–40000 N | 0–500000 N | 0–600000 N | 0–60000 N |
| Selected configuration options | 1 MN nominal force capacity | 100 kN nominal force capacity | 2 MN nominal force capacity | 20 kN nominal force capacity | 200 kN nominal force capacity | 300 kN nominal force capacity | 40 kN nominal force capacity | 400 kN nominal force capacity | 500 kN nominal force capacity | 60 kN nominal force capacity | 600 kN nominal force capacity | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified |
| Nominal force capacity | 1000000 N | 100000 N | 2000000 N | 20000 N | 200000 N | 300000 N | 40000 N | 400000 N | 500000 N | 60000 N | 600000 N | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified |
| Accuracy (% FSO) | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 1 % | 1 % | 1 % | 1 % | 1 % | 1 % | 1 % | 1 % | 1 % | 1 % | 1 % |
| Interfaces | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | PROFINET | Ethernet | EtherCAT | Ethernet | PROFINET | Ethernet | Ethernet | Ethernet | Ethernet | Ethernet | EtherCAT |
| Outputs and interfaces | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | RS422 / RS485 | Analog 0-10V | Analog 0-10V | Analog 0-10V | Analog 0-10V | Digital I/O | Analog 0-10V | RS422 / RS485 | RS422 / RS485 | Digital I/O | Digital I/O |
| Sampling rate reference | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | ClipX fixed internal sampling rate; verify the configured filter and usable output bandwidth | DMP41 selectable result rate, intended for reference and calibration measurements | MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth | MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth | DMP41 selectable result rate, intended for reference and calibration measurements | DMP41 selectable result rate, intended for reference and calibration measurements | ClipX fixed internal sampling rate; verify the configured filter and usable output bandwidth | MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth | MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth | DMP41 selectable result rate, intended for reference and calibration measurements | DMP41 selectable result rate, intended for reference and calibration measurements |
| ADC sampling rate | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 19200 samples/s | 450 samples/s | 40000 samples/s | 450 samples/s | 450 samples/s | 19200 samples/s | 19200 samples/s | 19200 samples/s | 19200 samples/s | 450 samples/s | 450 samples/s |
| Technical specification details | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 1000 kN rated capacity = 1,000 kN (101.9716 t mass equivalent at standard gravity); compression | 100 kN rated capacity = 100 kN (10.1972 t mass equivalent at standard gravity); compression | 2000 kN rated capacity = 2,000 kN (203.9432 t mass equivalent at standard gravity); compression | 200 kN rated capacity = 200 kN (20.3943 t mass equivalent at standard gravity); compression | 20 kN rated capacity = 20 kN (2.0394 t mass equivalent at standard gravity); compression | 300 kN rated capacity = 300 kN (30.5915 t mass equivalent at standard gravity); compression | 400 kN rated capacity = 400 kN (40.7886 t mass equivalent at standard gravity); compression | 40 kN rated capacity = 40 kN (4.0789 t mass equivalent at standard gravity); compression | 500 kN rated capacity = 500 kN (50.9858 t mass equivalent at standard gravity); compression | 600 kN rated capacity = 600 kN (61.183 t mass equivalent at standard gravity); compression | 60 kN rated capacity = 60 kN (6.1183 t mass equivalent at standard gravity); compression |
| Status | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
| Datasheet | PDF — K-KMR+ · 1 MN (opens in a new tab) | PDF — K-KMR+ · 100 kN (opens in a new tab) | PDF — K-KMR+ · 2 MN (opens in a new tab) | PDF — K-KMR+ · 20 kN (opens in a new tab) | PDF — K-KMR+ · 200 kN (opens in a new tab) | PDF — K-KMR+ · 300 kN (opens in a new tab) | PDF — K-KMR+ · 40 kN (opens in a new tab) | PDF — K-KMR+ · 400 kN (opens in a new tab) | PDF — K-KMR+ · 500 kN (opens in a new tab) | PDF — K-KMR+ · 60 kN (opens in a new tab) | PDF — K-KMR+ · 600 kN (opens in a new tab) |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
Quantitative force measurement requires calibration after installation. The washer operates in a force shunt, so the installation affects effective sensitivity.
Match both thread size and force. Options extend from M6 at 20 kN to M42 at 2 MN.
The manufacturer specifies IP68, hermetic sealing and stainless-steel construction.
Yes. Its strain-gauge technology supports static as well as dynamic force measurement.
They provide suitable force introduction into the measuring washer and ease contact-surface requirements. Install them as instructed rather than automatically replacing them with ordinary washers; calibration in the working installation is still required.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product