K-T210 · 5 N·m · electrical_output=L (IO-Link); rotational_speed_system=3 (IO-Link + speed system)
From the T210 series
T210: sensors and measurement devices by HBK for torque.
- Maximum rotational speed
- 20000 rpm
- Selected electrical output
- IO-Link
Capacity and selected options are specific to this record. Remaining options: HBK-K-T210-v1
Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)
Technical specification
Every engineering figure, laid out to scan quickly
| Nominal torque capacity | 5 Nm |
|---|---|
| Maximum rotational speed | 20000 rpm |
| Interfaces | IO-Link |
| Selected electrical output | IO-Link |
| Ordering options and constraints | K-T210 — capacity: 0.5 N·m, 1 N·m, 2 N·m, 5 N·m, 10 N·m, 20 N·m, 50 N·m, 100 N·m, 200 N·m; size_length: 95 mm (0.5–2 N·m), 145 mm (5–20 N·m), 170 mm (50–200 N·m); accuracy: S; maximum_speed: S; electrical_output: FA (frequency + analog), L (IO-Link); rotational_speed_system: 0 (none), 1 (512 pulses), 2 (1024 pulses), 3 (IO-Link + speed system); custom_modification: N; io_link_firmware: N / IO01 v1.0.0; constraints: [{"when": {"electrical_output": "L (IO-Link)"}, "allow": {"rotational_speed_system": ["0 (none)", "3 (IO-Link + speed system)"]}, "reason": "The T210 ordering data reserves the IO-Link speed-system option for the IO-Link electrical output."}] |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Selected configuration options | accuracy=S;maximum_speed=S;size_length=145 mm (5–20 N·m);electrical_output=L (IO-Link);rotational_speed_system=3 (IO-Link + speed system);custom_modification=N;io_link_firmware=N / IO01 v1.0.0 |
|---|---|
| Selected configuration options | 5 N·m nominal torque capacity |
Compatible accessories
Cables
-
1-KAB434-5
Only for source configuration configuration-56124e2112ddbab3f1874aef: K-T210 · 200 N·m configuration · accuracy=S;maximum_speed=S;size_length=170 mm (50–200 N·m);electrical_output=FA (frequency + analog);rotational_speed_system=2 (1024 pulses);custom_modification=N;io_link_firmware=N / IO01 v1.0.0; selected configuration must be matched before display.; For the FA frequency+analog output only, not the L IO-Link version. KAB151A/KAB152 are VK20A junction-box leads, not direct sensor cables. Verify the actual output code and input port before reusing T21WN wiring.
-
1-KAB435-10
Only for source configuration configuration-56124e2112ddbab3f1874aef: K-T210 · 200 N·m configuration · accuracy=S;maximum_speed=S;size_length=170 mm (50–200 N·m);electrical_output=FA (frequency + analog);rotational_speed_system=2 (1024 pulses);custom_modification=N;io_link_firmware=N / IO01 v1.0.0; selected configuration must be matched before display.; For the FA frequency+analog output only, not the L IO-Link version. KAB151A/KAB152 are VK20A junction-box leads, not direct sensor cables. Verify the actual output code and input port before reusing T21WN wiring.
-
3-3312.0268
Only for source configuration configuration-56124e2112ddbab3f1874aef: K-T210 · 200 N·m configuration · accuracy=S;maximum_speed=S;size_length=170 mm (50–200 N·m);electrical_output=FA (frequency + analog);rotational_speed_system=2 (1024 pulses);custom_modification=N;io_link_firmware=N / IO01 v1.0.0; selected configuration must be matched before display.; For the FA frequency+analog output only, not the L IO-Link version. KAB151A/KAB152 are VK20A junction-box leads, not direct sensor cables. Verify the actual output code and input port before reusing T21WN wiring.
-
1-VK20A
Only for source configuration configuration-56124e2112ddbab3f1874aef: K-T210 · 200 N·m configuration · accuracy=S;maximum_speed=S;size_length=170 mm (50–200 N·m);electrical_output=FA (frequency + analog);rotational_speed_system=2 (1024 pulses);custom_modification=N;io_link_firmware=N / IO01 v1.0.0; selected configuration must be matched before display.; For the FA frequency+analog output only, not the L IO-Link version. KAB151A/KAB152 are VK20A junction-box leads, not direct sensor cables. Verify the actual output code and input port before reusing T21WN wiring.
-
1-KAB151A-1.5
Only for source configuration configuration-56124e2112ddbab3f1874aef: K-T210 · 200 N·m configuration · accuracy=S;maximum_speed=S;size_length=170 mm (50–200 N·m);electrical_output=FA (frequency + analog);rotational_speed_system=2 (1024 pulses);custom_modification=N;io_link_firmware=N / IO01 v1.0.0; selected configuration must be matched before display.; For the FA frequency+analog output only, not the L IO-Link version. KAB151A/KAB152 are VK20A junction-box leads, not direct sensor cables. Verify the actual output code and input port before reusing T21WN wiring.
-
1-KAB152-1.5
Only for source configuration configuration-56124e2112ddbab3f1874aef: K-T210 · 200 N·m configuration · accuracy=S;maximum_speed=S;size_length=170 mm (50–200 N·m);electrical_output=FA (frequency + analog);rotational_speed_system=2 (1024 pulses);custom_modification=N;io_link_firmware=N / IO01 v1.0.0; selected configuration must be matched before display.; For the FA frequency+analog output only, not the L IO-Link version. KAB151A/KAB152 are VK20A junction-box leads, not direct sensor cables. Verify the actual output code and input port before reusing T21WN wiring.
Mounting
-
1-4413.00xx / K-MBC
Only for source configuration configuration-8e760ae93410cae780380c3a: K-T210 · 200 N·m configuration · accuracy=S;maximum_speed=S;size_length=170 mm (50–200 N·m);electrical_output=L (IO-Link);rotational_speed_system=3 (IO-Link + speed system);custom_modification=N;io_link_firmware=N / IO01 v1.0.0; selected configuration must be matched before display.; Select both bore diameters, rated torque, speed, allowable misalignment and moment of inertia. D1 is selected for the transducer side and D2 for the drive shaft; this family placeholder is not an orderable final coupling code.
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product