T40FM-60kNm

From the T40FM series

T40FM: sensors and measurement devices by HBK for torque.

Torque range: -60000–60000 Nm
Maximum rotational speed: 4500 rpm

Request a quote for this product Schedule a demonstration Talk to an expert

This series on the HBK site

HBK T40FM product photo from the datasheet; it shows a series example and does not necessarily indicate the selected capacity

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for T40FM-60kNm
Torque range	-60000–60000 Nm
Maximum rotational speed	4500 rpm
Outputs and interfaces	Digital I/O
Operating temperature	-20–85 °C
Protection class (DIN EN 60529)	IP54
Technical specification details	±60 kNm rated torque; rotating installation; maximum 4,500 rpm
Rotational speed measurement	True
Linearity reference	"Non-linearity including hysteresis, with output mode and maximum-torque band preserved in precisionData."
Repeatability reference	"Relative standard deviation of repeatability/reproducibility per DIN 1319, relative to output-signal variation; mode-specific values retained in precisionData."

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

ADC sampling rate	20000 samples/s
ADC sampling rate	1000 samples/s
ADC sampling rate	4000 samples/s
Interfaces	EtherCAT
Interfaces	PROFINET
Interfaces	Ethernet
Sampling rate reference	TIM-EC bus cycle; transducer bandwidth and selected filters remain limiting factors
Sampling rate reference	TIM-PN bus cycle; transducer bandwidth and selected filters remain limiting factors
Sampling rate reference	TIM40 bus cycle; transducer bandwidth and selected filters remain limiting factors