K-U10M · 1.25 MN
From the U10M series
U10M: sensors and measurement devices by HBK for force.
Capacity and selected options are specific to this record. Remaining options: HBK-K-U10M-v1
Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)
Technical specification
Every engineering figure, laid out to scan quickly
| Nominal force capacity | 1250000 N |
|---|---|
| Ordering options and constraints | K-U10M — capacity: 1.25 kN, 2.5 kN, 5 kN, 12.5 kN, 25 kN, 50 kN, 125 kN, 250 kN, 500 kN, 1.25 MN; bridge: SB, DB; rated_output: N, J; calibration: 100%, 200%; teds: Not selected, T; mechanical_design: W adapter, N flange; plug_protection: P, U; electrical_connection: B, G, K (6 m), V (15 m), 00A4 (VAIO); force_application: O, L; cable_plug: Y, F, Q, N, P, M, X; integrated_amplifier: N, VAIO; constraints: [{"when": {"teds": "T"}, "deny": {"integrated_amplifier": ["VAIO"]}, "reason": "TEDS and the integrated VAIO amplifier are mutually exclusive in the official configuration."}, {"when": {"integrated_amplifier": "VAIO"}, "allow": {"electrical_connection": "00A4 (VAIO)"}, "reason": "The VAIO connection is reserved for the integrated-amplifier option."}] |
| Selected configuration options | 1.25 MN nominal force capacity |
Compatible accessories
Cables
-
K-CAB-F-B
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; Only for the listed passive SG sensor socket; fixed-cable K/V and VAIO/4-pin IO-Link are excluded. Select the amplifier end and validate carrier-frequency precision, EMC and calibration with the cable length.; 0131: static/dynamic bend radius 22/50 mm, -50…80 °C, 280 Ω/km; high-precision use may require low carrier frequency and stable temperature. 0157: 37/75 mm, -50…85 °C, 78 Ω/km. 139B: 75 mm static, no drag chain; -30…70 °C stationary / -5…50 °C moving; incompatible with P/M ends.; IP protection depends on the actual sensor socket, seal and connector locking; a generic connector IP rating is not the assembled sensor IP rating.
-
K-CAB-F-G
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; Only for the listed passive SG sensor socket; fixed-cable K/V and VAIO/4-pin IO-Link are excluded. Select the amplifier end and validate carrier-frequency precision, EMC and calibration with the cable length.; 0131: static/dynamic bend radius 22/50 mm, -50…80 °C, 280 Ω/km; high-precision use may require low carrier frequency and stable temperature. 0157: 37/75 mm, -50…85 °C, 78 Ω/km. 139B: 75 mm static, no drag chain; -30…70 °C stationary / -5…50 °C moving; incompatible with P/M ends.; IP protection depends on the actual sensor socket, seal and connector locking; a generic connector IP rating is not the assembled sensor IP rating.
-
K-CAB-F-L
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; Only for the listed passive SG sensor socket; fixed-cable K/V and VAIO/4-pin IO-Link are excluded. Select the amplifier end and validate carrier-frequency precision, EMC and calibration with the cable length.; 0131: static/dynamic bend radius 22/50 mm, -50…80 °C, 280 Ω/km; high-precision use may require low carrier frequency and stable temperature. 0157: 37/75 mm, -50…85 °C, 78 Ω/km. 139B: 75 mm static, no drag chain; -30…70 °C stationary / -5…50 °C moving; incompatible with P/M ends.; IP protection depends on the actual sensor socket, seal and connector locking; a generic connector IP rating is not the assembled sensor IP rating.
-
1-KAB157-3
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; The threaded cable is rated differently in U10M and C10 documents; do not assign a universal IP class. Check socket, locked connector and end wiring.
-
1-KAB158-3
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; The threaded cable is rated differently in U10M and C10 documents; do not assign a universal IP class. Check socket, locked connector and end wiring.
-
1-CON/BS1
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; BS1: cable Ø4–6.5 mm; BS2: Ø≥6.5 mm. Match bayonet/threaded sensor connection, sealing and wiring.
-
1-CON/BS2
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; BS1: cable Ø4–6.5 mm; BS2: Ø≥6.5 mm. Match bayonet/threaded sensor connection, sealing and wiring.
-
3-3312.0354
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; BS1: cable Ø4–6.5 mm; BS2: Ø≥6.5 mm. Match bayonet/threaded sensor connection, sealing and wiring.
-
1-EEK4
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; Grounding accessory, not a measurement-signal cable.
-
1-EEK6
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; Grounding accessory, not a measurement-signal cable.
-
1-EEK8
Only for source configuration configuration-f9ea1f13fa3a9856b15a30a5: K-U10M · 1.25 MN configuration; selected configuration must be matched before display.; Grounding accessory, not a measurement-signal cable.
Mounting
-
1-Z4/20kN/ZGUW
Only for source configuration configuration-cce1231401650668f78fdaf0: K-U10M · 25 kN configuration; selected configuration must be matched before display.; Static tensile loading only; not compression or fatigue qualification. Verify exact rated capacity and thread.
-
1-ZGAM33F
Only for source configuration configuration-52726999a6594ecf17183d30: K-U10M · 125 kN configuration; selected configuration must be matched before display.; Static tensile loading only; not compression or fatigue qualification. Verify exact rated capacity and thread.
-
1-ZGAM42F
Only for source configuration configuration-dbde2ddaacceafe597ecc6de: K-U10M · 250 kN configuration; selected configuration must be matched before display.; Static tensile loading only; not compression or fatigue qualification. Verify exact rated capacity and thread.
-
1-ZGAM72F
Only for source configuration configuration-28d0babd11da16791c108ede: K-U10M · 500 kN configuration; selected configuration must be matched before display.; Static tensile loading only; not compression or fatigue qualification. Verify exact rated capacity and thread.
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product