ILD1320-25
From the optoNCDT 1320 series
optoNCDT 1320: sensors and measurement devices by Micro-Epsilon for laser triangulation.
Download the datasheet (opens in a new tab) This series on the Micro-Epsilon site (opens in a new tab)
Technical specification
Every engineering figure, laid out to scan quickly
| Measuring range | 25 mm |
|---|---|
| Start of measuring range | 25 mm |
| End of measuring range | 50 mm |
| Resolution | 1 µm |
| Linearity | 25 µm |
| Repeatability | 2.5 µm |
| Light spot size on target at mid measuring range | 55 × 60 µm |
| Operating temperature | 0–50 °C |
| Protection class (DIN EN 60529) | IP67 |
| Contact | Non-contact |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Interfaces | PROFINET |
|---|---|
| Interfaces | RS422 |
| Interfaces | EtherCAT |
| Interfaces | EtherNet/IP |
| Interfaces | Ethernet |
| Interfaces | USB |
| Measuring rate | 4 kHz |
| Measuring rate | 1 kHz |
| Outputs and interfaces | Analog 0-10V |
| Outputs and interfaces | RS422 / RS485 |
| Selectable measuring rates | 250 Hz |
| Selectable measuring rates | 4 kHz |
| Selectable measuring rates | 2 kHz |
| Selectable measuring rates | 500 Hz |
| Selectable measuring rates | 1 kHz |
Compatible accessories
Controllers
-
IF2001/USB
Required
-
IF2008/ETH
Required
Complementary products
-
IF1032/ETH
Optional
-
IF2035-PROFINET
Optional
-
IF2035-EIP
Optional
-
IF2035-EtherCAT
Optional
-
IF2001/USB
Optional
-
IF2004/USB
Optional
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product