turboSPEED DZ140 Rotational speed
turboSPEED DZ140: sensors and measurement devices by Micro-Epsilon for rotational speed.
Download the datasheet (opens in a new tab) This series on the Micro-Epsilon site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
Range across models
The span covered by the models of the series together — not the range of each model.
| Cable length | 0.5–0.8 m |
|---|---|
| Operating temperature | -50–235 °C |
| Cable diameter | 3.5–6 mm |
| Storage temperature | -40–235 °C |
Models in the series
One column per model: what differs between the models of the series.
| Parameter | DS 05(03) | DS 05(04) | DS 05(07) | DS 05(14) | DS 05(15) | DS 1 | DS 1(04) | DS 1/T |
|---|---|---|---|---|---|---|---|---|
| Protection class (DIN EN 60529) | IP65 | IP65 | IP65 | IP65 | IP65 | IP65 | IP65 | IP65 |
| Linearity reference | Official DZ140 controller linearity is better than ±0.2% FSO over the configured 200 to 400,000 rpm measuring range. | Official DZ140 controller linearity is better than ±0.2% FSO over the configured 200 to 400,000 rpm measuring range. | Official DZ140 controller linearity is better than ±0.2% FSO over the configured 200 to 400,000 rpm measuring range. | Official DZ140 controller linearity is better than ±0.2% FSO over the configured 200 to 400,000 rpm measuring range. | Official DZ140 controller linearity is better than ±0.2% FSO over the configured 200 to 400,000 rpm measuring range. | Official DZ140 controller linearity is better than ±0.2% FSO over the configured 200 to 400,000 rpm measuring range. | Official DZ140 controller linearity is better than ±0.2% FSO over the configured 200 to 400,000 rpm measuring range. | Official DZ140 controller linearity is better than ±0.2% FSO over the configured 200 to 400,000 rpm measuring range. |
| Sensor shielding | "shielded" | "shielded" | "shielded" | "shielded" | "shielded" | "shielded" | "shielded" | "shielded" |
| Technical specification details | 200 to 400,000 rpm; target gap up to 2.2 mm; curved clamp-mount housing; sensor operation to 200 °C. | 200 to 400,000 rpm; target gap up to 2.2 mm; straight clamp-mount housing; sensor operation to 200 °C. | 200 to 400,000 rpm; target gap up to 2.2 mm; M5 screw connection; sensor operation to 200 °C. | 200 to 400,000 rpm; target gap up to 2.2 mm; extended M5 screw connection; sensor operation to 200 °C. | 200 to 400,000 rpm; target gap up to 2.2 mm; compact M5 screw connection; sensor operation to 200 °C. | 200 to 400,000 rpm; target gap up to 2.2 mm; M5 x 0.5 screw connection; sensor operation to 235 °C. | 200 to 400,000 rpm; target gap up to 2.2 mm; M5 x 0.5 connection with stainless-steel protective hose; sensor operation to 235 °C. | 200 to 400,000 rpm; target gap up to 2.2 mm; triaxial high-temperature connection; 285 °C short-term; sensor operation to 235 °C. |
| Cable length | 0.5 m | 0.5 m | 0.5 m | 0.5 m | 0.5 m | 0.75 m | 0.8 m | 0.8 m |
| Sensor mechanical feature | "curved housing" | Not specified | Not specified | "housing length 42.5 mm" | Not specified | Not specified | "protective hose (stainless steel)" | Not specified |
| Non-contact speed measurement | True | True | True | True | True | True | True | True |
| Cable connector type | "BNC coaxial" | "BNC coaxial" | "BNC coaxial" | "BNC coaxial" | "BNC coaxial" | "BNC coaxial" | "BNC coaxial" | "BNC triaxial" |
| Accuracy (% FSO) | 0.2 % | 0.2 % | 0.2 % | 0.2 % | 0.2 % | 0.2 % | 0.2 % | 0.2 % |
| Sampling rate reference | The controller supplies one TTL pulse per blade or one pulse per revolution plus a 0 to 5 V speed output; no unsupported scalar update-rate claim is added. | The controller supplies one TTL pulse per blade or one pulse per revolution plus a 0 to 5 V speed output; no unsupported scalar update-rate claim is added. | The controller supplies one TTL pulse per blade or one pulse per revolution plus a 0 to 5 V speed output; no unsupported scalar update-rate claim is added. | The controller supplies one TTL pulse per blade or one pulse per revolution plus a 0 to 5 V speed output; no unsupported scalar update-rate claim is added. | The controller supplies one TTL pulse per blade or one pulse per revolution plus a 0 to 5 V speed output; no unsupported scalar update-rate claim is added. | The controller supplies one TTL pulse per blade or one pulse per revolution plus a 0 to 5 V speed output; no unsupported scalar update-rate claim is added. | The controller supplies one TTL pulse per blade or one pulse per revolution plus a 0 to 5 V speed output; no unsupported scalar update-rate claim is added. | The controller supplies one TTL pulse per blade or one pulse per revolution plus a 0 to 5 V speed output; no unsupported scalar update-rate claim is added. |
| Operating temperature | -50–200 °C | -40–200 °C | -40–200 °C | -40–200 °C | -50–200 °C | -40–235 °C | -40–235 °C | -50–200 °C |
| Sensor mounting | "Clamping/adapter" | "Clamping/adapter" | "Screw connection (M5)" | "Screw connection (M5)" | "Screw connection (M5)" | "Screw connection (M5)" | "Screw connection (M5)" | "Screw connection (M5)" |
| Cable diameter | 3.5 mm | 3.5 mm | 3.5 mm | 3.5 mm | 3.5 mm | 3.5 mm | 6 mm | Not specified |
| Sensor cable length tolerance | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 |
| Outputs and interfaces | Analog 0-10V | Digital I/O | Analog 0-10V | Analog 0-10V | Digital I/O | Analog 0-10V | Digital I/O | Analog 0-10V |
| Rotational speed range | 200–400000 rpm | 200–400000 rpm | 200–400000 rpm | 200–400000 rpm | 200–400000 rpm | 200–400000 rpm | 200–400000 rpm | 200–400000 rpm |
| Maximum rotational speed | 400000 rpm | 400000 rpm | 400000 rpm | 400000 rpm | 400000 rpm | 400000 rpm | 400000 rpm | 400000 rpm |
| Storage temperature | -40–200 °C | -40–200 °C | -40–200 °C | -40–200 °C | -40–200 °C | -40–235 °C | -40–235 °C | -40–235 °C |
| Repeatability reference | The official data sheet does not publish a separate scalar system repeatability value. | The official data sheet does not publish a separate scalar system repeatability value. | The official data sheet does not publish a separate scalar system repeatability value. | The official data sheet does not publish a separate scalar system repeatability value. | The official data sheet does not publish a separate scalar system repeatability value. | The official data sheet does not publish a separate scalar system repeatability value. | The official data sheet does not publish a separate scalar system repeatability value. | The official data sheet does not publish a separate scalar system repeatability value. |
| Working distance | 0–2.2 mm | 0–2.2 mm | 0–2.2 mm | 0–2.2 mm | 0–2.2 mm | 0–2.2 mm | 0–2.2 mm | 0–2.2 mm |
| Triax cable diameter (as described) | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 5 |
| Sensor maximum short-term temperature | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 285 |
| Sensor cable diameter (drawing) | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 4.5 |
| Status | Active | Active | Active | Active | Active | Active | Active | Active |
| Datasheet | PDF — DS 05(03) (opens in a new tab) | PDF — DS 05(04) (opens in a new tab) | PDF — DS 05(07) (opens in a new tab) | PDF — DS 05(14) (opens in a new tab) | PDF — DS 05(15) (opens in a new tab) | PDF — DS 1 (opens in a new tab) | PDF — DS 1(04) (opens in a new tab) | PDF — DS 1/T (opens in a new tab) |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
Aluminium and titanium blades are specified; this does not establish compatibility with other materials.
The stated rating applies to the sensor; it does not establish the controller or complete-system temperature rating.
The page lists 200–400000 rpm. Suitability also requires blade-material, clearance and head-installation checks.
Yes. It describes a miniature controller for engine-compartment integration and a head installed at the turbocharger. Match connections and each component’s environment.
No. Also define supported blade material, sensor clearance, speed and operating temperature. Together these determine the measurement configuration.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product