DS 05(07)
From the turboSPEED DZ140 series
turboSPEED DZ140: sensors and measurement devices by Micro-Epsilon for rotational speed.
- Maximum rotational speed
- 400000 rpm
Request a quote for this product
Build a matching system for this model
Schedule a demonstration
Talk to an expert
Download the datasheet
(opens in a new tab)
This series on the Micro-Epsilon site
(opens in a new tab)
Technical specification
Every engineering figure, laid out to scan quickly
| Rotational speed range | 200–400000 rpm |
|---|---|
| Storage temperature | -40–200 °C |
| Protection class (DIN EN 60529) | IP65 |
| Cable length | 0.5 m |
| Sensor mounting | "Screw connection (M5)" |
| Working distance | 0–2.2 mm |
| Maximum rotational speed | 400000 rpm |
| Non-contact speed measurement | True |
| Sensor shielding | "shielded" |
| Technical specification details | 200 to 400,000 rpm; target gap up to 2.2 mm; M5 screw connection; sensor operation to 200 °C. |
| Accuracy (% FSO) | 0.2 % |
| Sensor cable length tolerance | 0.15 |
| Cable diameter | 3.5 mm |
| Cable connector type | "BNC coaxial" |
| Linearity reference | Official DZ140 controller linearity is better than ±0.2% FSO over the configured 200 to 400,000 rpm measuring range. |
| Sampling rate reference | The controller supplies one TTL pulse per blade or one pulse per revolution plus a 0 to 5 V speed output; no unsupported scalar update-rate claim is added. |
| Repeatability reference | The official data sheet does not publish a separate scalar system repeatability value. |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Operating temperature | -40–200 °C |
|---|---|
| Operating temperature | -50–200 °C |
| Outputs and interfaces | Analog 0-10V |
| Outputs and interfaces | Digital I/O |
Compatible system components
Controllers
-
DZ140
Required
- Measuring rate
- Not specified
- Communication
- Not specified
- Inputs
- Not specified
- Signal type
- Not specified
Compatible accessories
Cables
-
PC140-x
Required with the chosen components
Power supplies
-
PS2020 (2420062)
Optional
Complementary products
-
IF1032/ETH
Optional
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product