1-C10/100KN

From the C10 series

C10: sensors and measurement devices by HBK for force.

Force range: 0–100000 N

Request a quote for this product Schedule a demonstration Talk to an expert

This series on the HBK site

Representative official C10 datasheet photo — labeled 100 kN example; dimensions and capacity vary by model

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for 1-C10/100KN
Force range	0–100000 N
Outputs and interfaces	Unknown
Pressure sensor output	mV/V (passive strain gauge)
Technical specification details	Maximum capacity (nominal load): 22.5 klbf; Output signal: mV/V (passive strain gauge); Height (without accessories): 1.87 in; Diameter (without cable or plug): 6.059043 in
Ordering options and constraints	K-C10 — capacity: 2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN; bridge: SB, DB; rated_output: N, J; calibration: 50%, 100%; teds: Not selected, T; mechanical_design: W adapter, N flange; plug_protection: P, U; electrical_connection: B, G, K (6 m), V (15 m), 00A4 (VAIO); force_application: O, L; cable_plug: Y, F, Q, N, P, M, X; integrated_amplifier: N, VAIO; constraints: [{"when": {"teds": "T"}, "deny": {"integrated_amplifier": ["VAIO"]}, "reason": "TEDS and the integrated VAIO amplifier are mutually exclusive in the official configuration."}, {"when": {"integrated_amplifier": "VAIO"}, "allow": {"electrical_connection": "00A4 (VAIO)"}, "reason": "The VAIO connection is reserved for the integrated-amplifier option."}]
Sampling rate limited by system readout	True
Repeatability reference	Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred.
Sampling rate reference	The selected HBK conditioner, filter and DAQ determine the digital sample rate.
Linearity reference	No single accuracy class is inferred when it is not shown for the exact ordering code.

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

Operating temperature	-10–60 °C
Operating temperature	-30–85 °C
Protection class (DIN EN 60529)	IP64
Protection class (DIN EN 60529)	IP67
Protection class (DIN EN 60529)	IP68