C10-5kN

From the C10 series

C10: sensors and measurement devices by HBK for force.

Force range: 0–5000 N

Request a quote for this product Schedule a demonstration Talk to an expert

This series on the HBK site

Representative official C10 datasheet photo — labeled 100 kN example; dimensions and capacity vary by model

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for C10-5kN
Force range	0–5000 N
Accuracy (% FSO)	0.02 %
Technical specification details	5 kN rated capacity = 5 kN (509.8581 kg mass equivalent at standard gravity); compression
Ordering options and constraints	K-C10 — capacity: 2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN; bridge: SB, DB; rated_output: N, J; calibration: 50%, 100%; teds: Not selected, T; mechanical_design: W adapter, N flange; plug_protection: P, U; electrical_connection: B, G, K (6 m), V (15 m), 00A4 (VAIO); force_application: O, L; cable_plug: Y, F, Q, N, P, M, X; integrated_amplifier: N, VAIO; constraints: [{"when": {"teds": "T"}, "deny": {"integrated_amplifier": ["VAIO"]}, "reason": "TEDS and the integrated VAIO amplifier are mutually exclusive in the official configuration."}, {"when": {"integrated_amplifier": "VAIO"}, "allow": {"electrical_connection": "00A4 (VAIO)"}, "reason": "The VAIO connection is reserved for the integrated-amplifier option."}]

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

ADC sampling rate	40000 samples/s
ADC sampling rate	450 samples/s
ADC sampling rate	19200 samples/s
ADC sampling rate	1111 samples/s
Interfaces	IO-Link
Interfaces	PROFINET
Interfaces	Ethernet
Interfaces	EtherCAT
Operating temperature	-10–60 °C
Operating temperature	-30–85 °C
Outputs and interfaces	Analog 0-10V
Outputs and interfaces	Digital I/O
Outputs and interfaces	RS422 / RS485
Protection class (DIN EN 60529)	IP68
Protection class (DIN EN 60529)	IP67
Protection class (DIN EN 60529)	IP64
Sampling rate reference	DMP41 selectable result rate, intended for reference and calibration measurements
Sampling rate reference	0.9 ms minimum IO-Link process-data cycle; the sensor electronics sample internally at 40 kHz
Sampling rate reference	ClipX fixed internal sampling rate; verify the configured filter and usable output bandwidth
Sampling rate reference	MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth