T40B Torque
T40B: sensors and measurement devices by HBK for torque.
This series on the HBK site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
Range across models
The span covered by the models of the series together — not the range of each model.
| Torque range | -10000–10000 Nm |
|---|---|
| Maximum rotational speed | 12000–24000 rpm |
| ADC sampling rate | 1000–20000 samples/s |
Models in the series
One column per model: what differs between the models of the series.
| Parameter | T40B | T40B-100Nm | T40B-10kNm | T40B-1kNm | T40B-200Nm | T40B-2kNm | T40B-3kNm | T40B-500Nm | T40B-50Nm | T40B-5kNm |
|---|---|---|---|---|---|---|---|---|---|---|
| Accuracy (% FSO) | 0.05 % | 0.05 % | 0.05 % | 0.05 % | 0.05 % | 0.05 % | 0.05 % | 0.05 % | 0.05 % | 0.05 % |
| Technical specification details | Configurable family; exact public ordering-code table not exposed on the current HBK page. | ±100 Nm rated torque; rotating installation; maximum 24,000 rpm | ±10 kNm rated torque; rotating installation; maximum 12,000 rpm | ±1 kNm rated torque; rotating installation; maximum 23,000 rpm | ±200 Nm rated torque; rotating installation; maximum 24,000 rpm | ±2 kNm rated torque; rotating installation; maximum 18,000 rpm | ±3 kNm rated torque; rotating installation; maximum 18,000 rpm | ±500 Nm rated torque; rotating installation; maximum 24,000 rpm | ±50 Nm rated torque; rotating installation; maximum 24,000 rpm | ±5 kNm rated torque; rotating installation; maximum 14,000 rpm |
| Outputs and interfaces | Unknown | Digital I/O | Digital I/O | Digital I/O | Digital I/O | Digital I/O | Digital I/O | Digital I/O | Digital I/O | Digital I/O |
| Linearity reference | Not specified | "Non-linearity including hysteresis, relative to nominal rated sensitivity; piecewise by maximum torque band and frequency/voltage output mode." | "Non-linearity including hysteresis, relative to nominal rated sensitivity; piecewise by maximum torque band and frequency/voltage output mode." | "Non-linearity including hysteresis, relative to nominal rated sensitivity; piecewise by maximum torque band and frequency/voltage output mode." | "Non-linearity including hysteresis, relative to nominal rated sensitivity; piecewise by maximum torque band and frequency/voltage output mode." | "Non-linearity including hysteresis, relative to nominal rated sensitivity; piecewise by maximum torque band and frequency/voltage output mode." | "Non-linearity including hysteresis, relative to nominal rated sensitivity; piecewise by maximum torque band and frequency/voltage output mode." | "Non-linearity including hysteresis, relative to nominal rated sensitivity; piecewise by maximum torque band and frequency/voltage output mode." | "Non-linearity including hysteresis, relative to nominal rated sensitivity; piecewise by maximum torque band and frequency/voltage output mode." | "Non-linearity including hysteresis, relative to nominal rated sensitivity; piecewise by maximum torque band and frequency/voltage output mode." |
| Sampling rate reference | Not specified | TIM-EC bus cycle; transducer bandwidth and selected filters remain limiting factors | TIM-EC bus cycle; transducer bandwidth and selected filters remain limiting factors | TIM40 bus cycle; transducer bandwidth and selected filters remain limiting factors | TIM40 bus cycle; transducer bandwidth and selected filters remain limiting factors | TIM-EC bus cycle; transducer bandwidth and selected filters remain limiting factors | TIM-EC bus cycle; transducer bandwidth and selected filters remain limiting factors | TIM-PN bus cycle; transducer bandwidth and selected filters remain limiting factors | TIM-EC bus cycle; transducer bandwidth and selected filters remain limiting factors | TIM-PN bus cycle; transducer bandwidth and selected filters remain limiting factors |
| Torque range | Not specified | -100–100 Nm | -10000–10000 Nm | -1000–1000 Nm | -200–200 Nm | -2000–2000 Nm | -3000–3000 Nm | -500–500 Nm | -50–50 Nm | -5000–5000 Nm |
| Interfaces | Not specified | PROFINET | EtherCAT | Ethernet | EtherCAT | PROFINET | PROFINET | EtherCAT | EtherCAT | Ethernet |
| Maximum rotational speed | Not specified | 24000 rpm | 12000 rpm | 23000 rpm | 24000 rpm | 18000 rpm | 18000 rpm | 24000 rpm | 24000 rpm | 14000 rpm |
| ADC sampling rate | Not specified | 1000 samples/s | 1000 samples/s | 4000 samples/s | 1000 samples/s | 4000 samples/s | 20000 samples/s | 1000 samples/s | 4000 samples/s | 20000 samples/s |
| Operating temperature | Not specified | -20–85 °C | -20–85 °C | -20–85 °C | -20–85 °C | -20–85 °C | -20–85 °C | -20–85 °C | -20–85 °C | -20–85 °C |
| Rotational speed measurement | Not specified | True | True | True | True | True | True | True | True | True |
| Protection class (DIN EN 60529) | Not specified | IP54 | IP54 | IP54 | IP54 | IP54 | IP54 | IP54 | IP54 | IP54 |
| Repeatability reference | Not specified | "Relative standard deviation per DIN 1319, relative to variation of the output signal." | "Relative standard deviation per DIN 1319, relative to variation of the output signal." | "Relative standard deviation per DIN 1319, relative to variation of the output signal." | "Relative standard deviation per DIN 1319, relative to variation of the output signal." | "Relative standard deviation per DIN 1319, relative to variation of the output signal." | "Relative standard deviation per DIN 1319, relative to variation of the output signal." | "Relative standard deviation per DIN 1319, relative to variation of the output signal." | "Relative standard deviation per DIN 1319, relative to variation of the output signal." | "Relative standard deviation per DIN 1319, relative to variation of the output signal." |
| Status | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
No. The family brochure’s 6 kHz at −3 dB describes frequency response. TIM-EC separately specifies a bus rate up to 20 kHz. Evaluate both for the selected system path.
No. TMC is the torque measurement communication interface. The brochure identifies separate TIM modules: TIM-EC for EtherCAT and TIM-PN for PROFINET. Select the corresponding adapter.
The brochure describes a compact torque flange for test benches and process monitoring, with distinct nominal-torque versions. Match rotational speed and parasitic loads as well.
No. The brochure’s maximum of up to 24,000 rpm is explicitly range-dependent. Select speed for the exact capacity and configuration.
The brochure lists the speed system with reference signal and 1024 pulses/revolution as an option. Do not assign it to every order code.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product