T40B-50Nm
From the T40B series
T40B: sensors and measurement devices by HBK for torque.
- Torque range
- -50–50 Nm
- Maximum rotational speed
- 24000 rpm
Technical specification
Every engineering figure, laid out to scan quickly
| Torque range | -50–50 Nm |
|---|---|
| Accuracy (% FSO) | 0.05 % |
| Maximum rotational speed | 24000 rpm |
| Outputs and interfaces | Digital I/O |
| Operating temperature | -20–85 °C |
| Protection class (DIN EN 60529) | IP54 |
| Technical specification details | ±50 Nm rated torque; rotating installation; maximum 24,000 rpm |
| Rotational speed measurement | True |
| Repeatability reference | "Relative standard deviation per DIN 1319, relative to variation of the output signal." |
| Linearity reference | "Non-linearity including hysteresis, relative to nominal rated sensitivity; piecewise by maximum torque band and frequency/voltage output mode." |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| ADC sampling rate | 4000 samples/s |
|---|---|
| ADC sampling rate | 20000 samples/s |
| ADC sampling rate | 1000 samples/s |
| Interfaces | EtherCAT |
| Interfaces | Ethernet |
| Interfaces | PROFINET |
| Sampling rate reference | TIM-EC bus cycle; transducer bandwidth and selected filters remain limiting factors |
| Sampling rate reference | TIM-PN bus cycle; transducer bandwidth and selected filters remain limiting factors |
| Sampling rate reference | TIM40 bus cycle; transducer bandwidth and selected filters remain limiting factors |
Compatible accessories
Controllers
Cables
-
1-KAB149-6
Required with the chosen components
-
1-KAB153-6
Required with the chosen components
-
1-KAB150-6
Required with the chosen components
-
1-KAB154-6
Required with the chosen components
-
1-KAB163-6
Required with the chosen components
-
1-KAB164-6
Required with the chosen components
-
3-3101.0247
Required with the chosen components
-
3-3312.0281
Required with the chosen components
-
3-3312.0120
Required with the chosen components
-
3-3312.0282
Required with the chosen components
-
4-3301.0071
Required with the chosen components
-
1-KAB174-6
Required with the chosen components
Complementary products
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product