Z7A-0p5t
From the Z7A series
Z7A: sensors and measurement devices by HBK for force.
- Force range
- 0–4903.325 N
- Bridge sensitivity
- 2 mV/V
Technical specification
Every engineering figure, laid out to scan quickly
| Force range | 0–4903.325 N |
|---|---|
| Bridge sensitivity | 2 mV/V |
| Maximum excitation voltage | 18 V |
| Input resistance | 350 ohm |
| Safe load limit (% of Emax) | 150% of Emax |
| Breaking load (as specified) | 300 |
| Permissible dynamic load amplitude (% of Emax) | 70 |
| Storage temperature | -50–85 °C |
| Operating temperature | -30–70 °C |
| Nominal temperature range | -10–40 °C |
| Protection class (DIN EN 60529) | IP67 |
| Weight | 2.3 kg |
| Mounting torque | 135 Nm |
| Maximum load cell verification intervals | 1000 |
| Minimum verification interval (% of Emax) | 0.0357 |
| Minimum verification interval ratio Y | 2800 |
| Technical specification details | 0.5 t rated capacity = 4.9033 kN (500 kg mass equivalent at standard gravity); compression |
| Accuracy class (OIML R60) | D1 |
| Nominal displacement | approximately 0.25 mm |
| Ordering options and constraints | K-Z7A_ — capacity: 1102.31 lb, 2204.62 lb, 4409.24 lb, 11023.11 lb, 22046.22 lb; accuracy_class: D1, C3; minimum_verification_interval_vmin: 178.5 g, 357 g, 714 g, 1785 g, 3570 g, 200 g, 500 g, 1000 g; constraints: [] |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| ADC sampling rate | 19200 samples/s |
|---|---|
| ADC sampling rate | 40000 samples/s |
| Interfaces | Ethernet |
| Interfaces | EtherCAT |
| Interfaces | PROFINET |
| Outputs and interfaces | Analog 0-10V |
| Outputs and interfaces | Digital I/O |
| Sampling rate reference | ClipX fixed internal sampling rate; verify the configured filter and usable output bandwidth |
| Sampling rate reference | MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product