Z7A-10t

From the Z7A series

Z7A: sensors and measurement devices by HBK for force.

Force range: 0–98066.5 N
Bridge sensitivity: 2 mV/V

Request a quote for this product Schedule a demonstration Talk to an expert

This series on the HBK site

HBK product photograph from the datasheet; the pictured example is a 2 t Z7A, not each capacity variant

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for Z7A-10t
Force range	0–98066.5 N
Bridge sensitivity	2 mV/V
Maximum excitation voltage	18 V
Input resistance	350 ohm
Safe load limit (% of Emax)	150% of Emax
Breaking load (as specified)	300
Permissible dynamic load amplitude (% of Emax)	70
Storage temperature	-50–85 °C
Operating temperature	-30–70 °C
Nominal temperature range	-10–40 °C
Protection class (DIN EN 60529)	IP67
Weight	8 kg
Mounting torque	1150 Nm
Technical specification details	10 t rated capacity = 98.0665 kN (10 t mass equivalent at standard gravity); compression
Nominal displacement	approximately 0.7 mm
Ordering options and constraints	K-Z7A_ — capacity: 1102.31 lb, 2204.62 lb, 4409.24 lb, 11023.11 lb, 22046.22 lb; accuracy_class: D1, C3; minimum_verification_interval_vmin: 178.5 g, 357 g, 714 g, 1785 g, 3570 g, 200 g, 500 g, 1000 g; constraints: []

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

ADC sampling rate	19200 samples/s
ADC sampling rate	40000 samples/s
Accuracy class (OIML R60)	C3
Accuracy class (OIML R60)	D1
Interfaces	PROFINET
Interfaces	EtherCAT
Interfaces	Ethernet
Maximum load cell verification intervals	1000
Maximum load cell verification intervals	3000
Minimum verification interval (% of Emax)	0.01
Minimum verification interval (% of Emax)	0.0357
Minimum verification interval ratio Y	10000
Minimum verification interval ratio Y	2800
Outputs and interfaces	Digital I/O
Outputs and interfaces	Analog 0-10V
Sampling rate reference	MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth
Sampling rate reference	ClipX fixed internal sampling rate; verify the configured filter and usable output bandwidth