CSE1.25/M12
From the capaNCDT CSE/M series
capaNCDT CSE/M: sensors and measurement devices by Micro-Epsilon for capacitive.
- Number of measurement channels
- 1
Request a quote for this product
Build a matching system for this model
Schedule a demonstration
Talk to an expert
Download the datasheet
(opens in a new tab)
This series on the Micro-Epsilon site
(opens in a new tab)
Technical specification
Every engineering figure, laid out to scan quickly
| Start of measuring range | 0 mm |
|---|---|
| Linearity | 1.25 µm |
| Recommended target diameter | 10 mm |
| Minimum target diameter | 10 mm |
| Storage temperature | -50–200 °C |
| Operating temperature | -50–200 °C |
| Protection class (DIN EN 60529) | IP40 |
| Weight | 0.0115 kg |
| Technical specification details | 0-1.25 mm model-level measuring interval |
| Temperature stability (µm/K) | -0.12 µm/K |
| Recommended mounting position | 4.4 mm from sensor face |
| Active area size (as specified) | 6.3 mm |
| Contact | Non-contact |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Interfaces | Ethernet |
|---|---|
| Interfaces | PROFINET |
| Interfaces | EtherCAT |
| Linearity reference | Official sensor linearity from the current capaNCDT catalog; total measuring-channel linearity also includes the DT6230 + DL6220 controller contribution. |
| Measuring range | 1.25 mm |
| Measuring range | 0.625 mm |
| Measuring range | 2.5 mm |
| Measuring window | 0–0.625 mm |
| Measuring window | 0–1.25 mm |
| Measuring window | 0–2.5 mm |
| Number of measurement channels | 1 |
| Number of measurement channels | 2 |
| Number of measurement channels | 4 |
| Number of measurement channels | 8 |
| Outputs and interfaces | RS422 / RS485 |
| Outputs and interfaces | 4-20mA |
| Outputs and interfaces | Analog 0-10V |
| Resolution | 0.000375 µm |
| Resolution | 0.025 µm |
| Sampling rate reference | DT6110: 1 kHz analog measurement bandwidth |
| Sampling rate reference | DT6120: 1 kHz analog bandwidth; up to 2 kSamples/s over RS485 |
| Sampling rate reference | DL6228: 1 kHz bandwidth and 3.906 kSamples/s digital rate; optimized for CSE/HT sensors |
| Sampling rate reference | DL6510 with CP6001: 8.5 kHz bandwidth in the official maximum-two-channel DT6530 base system |
| Sampling rate reference | DL6510 with CPM6011: 8.5 kHz bandwidth in the official maximum-two-channel DT6530 base system |
| Sampling rate reference | DT6120/IP: IP68 single-channel controller with 1 kHz analog bandwidth and up to 2 kSamples/s over RS485 |
| Sampling rate reference | DL6222: 20 kHz bandwidth; DT6222 digital rate 3.906 kSamples/s |
| Sampling rate reference | DT6110/IP: IP68 single-channel controller with 1 kHz bandwidth |
| Sampling rate reference | DL6230: 5 kHz bandwidth; DT6240 digital rate 3.906 kSamples/s |
| Sampling rate reference | DL6220: 5 kHz bandwidth; DT6230 digital rate 3.906 kSamples/s |
| Sampling rate reference | DL6530: 8.5 kHz bandwidth in the official maximum-two-channel DT6530 base system |
| Sampling rate reference | DL6220: 5 kHz bandwidth; DT6240 digital rate 3.906 kSamples/s |
| Sampling rate reference | DL6220: 5 kHz bandwidth; DT6220 digital rate 3.906 kSamples/s |
| Sampling rate reference | DL6230: 5 kHz bandwidth; DT6230 digital rate 3.906 kSamples/s |
| Sampling rate reference | DT6112 high-speed controller: 20 kHz bandwidth |
| Sampling rate reference | DL6230: 5 kHz bandwidth; DT6220 digital rate 3.906 kSamples/s |
| Sampling rate reference | DL6530: 8.5 kHz bandwidth; DT6530 digital rate 7.8 kSamples/s at 4 channels or 3.9 kSamples/s at 8 |
Compatible system components
Controllers
-
DT6110
Required
- Measuring rate
- Not specified
- Communication
- Not specified
- Inputs
- 1
- Signal type
- Not specified
-
DT6112
Required
- Measuring rate
- Not specified
- Communication
- Not specified
- Inputs
- 1
- Signal type
- Not specified
-
DT6120
Required
- Measuring rate
- 2 kHz
- Communication
- RS-485
- Inputs
- 1
- Signal type
- Not specified
-
DT6110/IP
Required
- Measuring rate
- Not specified
- Communication
- Not specified
- Inputs
- 1
- Signal type
- Not specified
-
DT6120/IP
Required
- Measuring rate
- 2 kHz
- Communication
- RS-485
- Inputs
- 1
- Signal type
- Not specified
-
DT6220
Required
- Measuring rate
- Not specified
- Communication
- Ethernet
- Inputs
- 4
- Signal type
- Not specified
-
DT6230
Required
- Measuring rate
- Not specified
- Communication
- Ethernet, EtherCAT
- Inputs
- 4
- Signal type
- Not specified
-
DT6240
Required
- Measuring rate
- Not specified
- Communication
- PROFINET
- Inputs
- 4
- Signal type
- Not specified
-
DT6222
Required
- Measuring rate
- Not specified
- Communication
- Ethernet
- Inputs
- 4
- Signal type
- Not specified
-
DT6228
Required
- Measuring rate
- Not specified
- Communication
- Ethernet
- Inputs
- 4
- Signal type
- Not specified
-
DT6238
Required
- Measuring rate
- Not specified
- Communication
- Ethernet, EtherCAT
- Inputs
- 4
- Signal type
- Not specified
-
DT6229
Required
- Measuring rate
- Not specified
- Communication
- Ethernet
- Inputs
- Not specified
- Signal type
- Not specified
-
DT6530
Required
- Measuring rate
- Not specified
- Communication
- Ethernet, EtherCAT
- Inputs
- Not specified
- Signal type
- Not specified
Compatible accessories
Cables
-
CCg
Required with the chosen components
-
CCg/PT
Required with the chosen components
-
CCm
Required with the chosen components
-
CCo
Required with the chosen components
-
PC6200-x/4
Required with the chosen components
-
SC6000-x
Required with the chosen components
- SCACx/5 configurable component family Required with the chosen components Only for source configuration configuration-77020f1561b77f1598c1bf62: CSE1.25/M12; selected configuration must be matched before display.
- SCACx/6 configurable component family Required with the chosen components Only for source configuration configuration-61ff948bc0022fc4b45a7422: CSE1.25/M12; selected configuration must be matched before display.
- SCACx/6/IP configurable component family Required with the chosen components Only for source configuration configuration-18b3fe4488097da45a69ed32: CSE1.25/M12; selected configuration must be matched before display.
- SCACx/4 configurable component family Required with the chosen components Only for source configuration configuration-085751c9edcc11002f5a3211: CSE1.25/M12; selected configuration must be matched before display.
- CAx configurable component family Required with the chosen components Only for source configuration configuration-e751be28efa696690c2d0b15: CSE1.25/M12; selected configuration must be matched before display.
Power supplies
-
PS2020 (2420062)
Optional
Mounting
Accessories
Complementary products
-
IF1032/ETH
Optional
-
CP6001
Optional
-
CMP6011
Optional
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product